IEEE 896.4-1993

This standard defines tester-independent conformance test procedures for Futurebus+. Specifically, this standard includes test procedures for verifying a module’s conformance to the requirements of ISO/IEC 10857 : 19941 and sections 3 and 4 of IEEE Std 896.2-1991. This standard does not include test procedures for physical layer or performance-related requirements defined by the profile specification sections of IEEE Std 896.2-1991 or of any other Futurebus+ standards. Because the requirements contained in the non-profile sections of ISO/IEC 10857 : 1994 and IEEE Std 896.2-1991 are for the logical layer, this is primarily a logical layer test standard. Section 9 contains tests for those electrical requirements that are: a) part of ISO/IEC 10857 : 1994 and b) not profile specific. Since the majority of the requirements for the bus signaling environment are contained in profiles, the tests in section 9 of this standard are not, nor are they intended to be, a complete set of electrical tests for any Futurebus+ profile. Similarly, section 4 of IEEE Std 896.2-1991 contains mainly description and points to profile for the requirements governing the implementation of live insertion. Since this is the case, no live insertion tests are included in this standard. Readers interested in tests for these requirements should look to ongoing standardization efforts for Futurebus+ electrical and live insertion requirements and for Futurebus+ profiles. This standard is intended for use in verifying the conformance of Futurebus+ modules to the Futurebus+ family of standards. Some of the information may be useful in performing production tests and tests that measure a module’s level of performance, but these types of testing are not within the scope of this standard. This standard is intended for the use of Futurebus+ manufacturers, users, and third-party test agencies. Use of a single test standard should allow different testers to arrive at similar test results.