BS PD ISO/TS 19880-1:2016

BS PD ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate, for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty land vehicles (e.g. Fuel Cell Electric Vehicles).

NOTE These recommendations are in addition to applicable national regulations and codes, which can prohibit certain aspects of this document.

This document is applicable to fuelling for light duty hydrogen land vehicles, but it can also be used as guidance for fuelling buses, trams, motorcycles and fork-lift truck applications, with hydrogen storage capacities outside of current published fuelling protocol standards, such as SAE J2601. Residential applications to fuel land vehicles and non-public demonstration fuelling stations are not included in this Technical Specification.

This Technical Specification provides guidance on the following elements of a fuelling station (see Figure 1 and Figure 2):

• hydrogen production/delivery system
• delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers;
• on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies;
• liquid hydrogen storage;
• hydrogen purification systems, as applicable;
• compression
• gaseous hydrogen compression;
• pumps and vaporizers;
• gaseous hydrogen buffer storage;
• pre-cooling device;
• gaseous hydrogen dispensers.

Cross References:

ASTM D7606-11

ASTM D7650-13

ASTM D7651-10

EN 13480-1

EN 13480-2

EN 13480-3

EN 13480-4

EN 13480-5

EN 13480-6

EN 13480-7

EN 13480-8

ISO 834-1

ISO 4126-1

ISO 4126-2

ISO 4414

ISO 10286

ISO 11114-1

ISO 11114-4

ISO 12100

ISO 13849-1

ISO 13849-2

ISO 13850

ISO 14113

ISO 14687-2

ISO 15649:2001

ISO/TR 15916

ISO 16110-1

ISO 16111

ISO 17268

ISO 21009-1

ISO 21010

ISO 21011

ISO 21012

ISO 21013-1

ISO 21013-2

ISO 21013-3

ISO 21028-1

ISO 22734-1

ISO 24490

ISO 26142

ISO 31000

ISO/IEC 31010

ISO/IEC/DIS 80079-36

ISO/IEC/DIS 80079-37.2

ISO/IEC Guide 51

ISO/IEC Guide 73

IEC 60068-1

IEC 60079-0

IEC 60079-2

IEC 60079-10-1

IEC 60079-11

IEC 60079-14

IEC 60079-17

IEC 60079-19

IEC 60079-20-1

IEC 60079-25

IEC 60204-1:2005

IEC 60364

IEC 60529

IEC PT 61000-3-1

IEC 61000-3-2

IEC 61000-3-3

IEC 61000-3-4

IEC 61000-3-5

IEC 61000-3-11

IEC 61000-3-12

IEC 61000-6-1

IEC 61000-6-2

IEC 61000-6-3

IEC 61000-6-4

IEC 61508

IEC 61511

IEC 62061

IEC 62305-1

IEC 62305-2

IEC 60364-4-41

CGA G-5.5

UN GTR No. 13

SAE J2600:2015-08

SAE J2601:2014-07

SAE J2799:2014-04

ISO 3864

ISO 5817

ISO 7000

ISO 7751

ISO 10628-1

ISO 11114-2

ISO 12944-7

ISO 16528-1

ISO 17398

ISO 23208

IEC 60079-4

IEC 60079-6

IEC 60079-30-1

IEC 60417

IEC 60445

IEC 60446

IEC 60947-4-1

IEC 61082-1

IEC 61882

IEC 61069-7

IEC 61340-4-1

IEC 61340-5-1

IEC 62023

EN 764-7

EN 1081

EN 1503-2

EN 1626

EN 12434

EN 13237

EN 13371

EN 13458-1

EN 13458-2

EN 13458-3

EN 13501-2

EN 13501-3

EN 13530-1

EN 13530-2

EN 13648-1

EN 13648-2

92/58/EEC

94/9/EC

97/23/EC

99/92/EC

2004/108/EC

2006/42/EC

IGC 075 07 E

NSS 1740.16-1997

BCGA CP41 – 2014

BCGA CP33 – Rev 1 – 2012

NFPA 2

NFPA 55

NFPA 70

ASME A13.1

ASME B31

CSA-HGV 4.3

CGA G-5.5

CAN/BNQ 1784-000/2007

GB 50516-2010

All current amendments available at time of purchase are included with the purchase of this document.