BS PD IEC/TS 62910:2015
$125.00
Utility-interconnected photovoltaic inverters. Test procedure for low voltage ride-through measurements
The technical specification is most applicable to large systems where PV inverters are connected to utility HV distribution systems. However, the applicable procedures may also be used for LV installations in locations where evolving LVRT requirements include such installations, e.g. single-phase or 3-phase systems.
The assessed LVRT performance is valid only for the specific configuration and operational mode of the inverter under test. Separate assessment is required for the inverter in other factory or user-settable configurations, as these may cause the inverter LVRT response to behave differently.
The measurement procedures are designed to be as non-site-specific as possible, so that LVRT characteristics measured at one test site, for example, can also be considered valid at other sites.
This technical specification is for testing of PV inverters, though it contains information that may also be useful for testing of a complete PV power plant consisting of multiple inverters connected at a single point to the utility grid. It further provides a basis for utilityinterconnected PV inverter numerical simulation and model validation.
Cross References:
IEC 61400-21:2008
IEC 60050-161:1990
IEC 60364-1:2005
EN 50530:2010
All current amendments available at time of purchase are included with the purchase of this document.
Related products
