BS PD IEC/TR 61243-6:2017

BS PD IEC/TR 61243-6:2017, which is a Technical Report, is applicable to portable non-contact voltage detectors (NCVD) with built-in power source, to be used to indicate the presence or the absence of the operating voltage on electrical systems for nominal voltages above 1 kV AC and frequencies of 16 2/3 Hz, 50 Hz and/or 60 Hz.

NOTE 16,7 Hz is often referenced.

This document applies only to devices that are not designed to be used in contact with the bare part of the installation on which the presence or the absence of the operating voltage has to be tested.

This document describes only devices, and their behaviour, using electric field and voltage gradient detection principles even if other principles could be used. It provides performance guidelines, recommendations for use and recommended minimum criteria for selection.

Devices like personal safety distance voltage detectors, distance voltage detectors for emergency responders or machine operators are not covered by this document.

Except when otherwise specified, all the voltages defined in this document refer to phase-tophase voltages of three-phase systems. In other systems, the applicable phase-to-phase or phase-to-earth (ground) voltages are used to determine the operating voltage.

Cross References:

IEC 61318:2007

CIE 15

IEC 60050-651:2014

IEC 61477:2009

IEC 60529:1989 Cons Ed 2-1

IEC 61243-1:2003

IEC TS 60479-1:2005

IEC 61326-1:2012

IEC 61243-3:2014

IEC 61936-1:2010

IEC 61243-2:1995 Cons Ed 1-2

IEC 61235:1993

IEC 60417-2:1998

IEC 60855-1:2016

IEC 60743:2013

IEC 60050-601:1985

IEC 60071-1:2006

All current amendments available at time of purchase are included with the purchase of this document.