ASTM A6/A6M-13a
$50.00
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
1.1This general requirements specification2 covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled structural steel bars, plates, shapes, and sheet piling covered by each of the following product specifications issued by ASTM:
|
ASTM |
Title of Specification |
|
A36/A36M |
Carbon Structural Steel |
|
A131/A131M |
Structural Steel for Ships |
|
A242/A242M |
High-Strength Low-Alloy Structural Steel |
|
A283/A283M |
Low and Intermediate Tensile Strength Carbon Steel Plates |
|
A328/A328M |
Steel Sheet Piling |
|
A514/A514M |
High-Yield Strength, Quenched and Tempered Alloy Steel Plate Suitable for Welding |
|
A529/A529M |
High-Strength Carbon-Manganese Steel of Structural Quality |
|
A572/A572M |
High-Strength Low-Alloy Columbium-Vanadium Steel |
|
A573/A573M |
Structural Carbon Steel Plates of Improved Toughness |
|
A588/A588M |
High-Strength Low-Alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point to 4 in. [100 mm] Thick |
|
A633/A633M |
Normalized High-Strength Low-Alloy Structural Steel Plates |
|
A656/A656M |
Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
|
A690/A690M |
High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments |
|
A709/A709M |
Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges |
|
A710/A710M |
Age-Hardening Low-Carbon Nickel-Copper-Chromium-Mo- |
|
A769/A769M |
Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes |
|
A786/A786M |
Rolled Steel Floor Plates |
|
A827/A827M |
Plates, Carbon Steel, for Forging and Similar Applications |
|
A829/A829M |
Plates, Alloy Steel, Structural Quality |
|
A830/A830M |
Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements |
|
A857/A857M |
Steel Sheet Piling, Cold Formed, Light Gage |
|
A871/A871M |
High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
|
A913/A913M |
High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
|
A871/A871M |
High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
|
A945/A945M |
High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness |
|
A950/A950M |
Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
|
A992/A992M |
Steel for Structural Shapes for Use in Building Framing |
|
A1043/A1043M |
Structural Steel with Low Yield to Tensile Ratio for Use in Buildings |
|
A1066/A1066M |
High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) |
1.2Annex A1 lists permitted variations in dimensions and mass (Note 1) in SI units. The values listed are not exact conversions of the values in Tables 1 to 31 inclusive but are, instead, rounded or rationalized values. Conformance to Annex A1 is mandatory when the “M” specification designation is used.
1.3Annex A2 lists the dimensions of some shape profiles.
1.4Appendix X1 provides information on coil as a source of structural products.
1.5Appendix X2 provides information on the variability of tensile properties in plates and structural shapes.
1.6Appendix X3 provides information on weldability.
1.7Appendix X4 provides information on cold bending of plates, including suggested minimum inside radii for cold bending.
<div class="S
Related products
