UL 1417

These requirements cover special types of fuses not covered by separate requirements and that are for use in radio- and television-type appliances where they are relied upon to limit power or current, or both. These requirements also apply to holders intended to accept such special fuses, where the holder may be an integral part of the fuse design. It should be noted, however, that compliance of a special fuse with these requirements does not assure that it is acceptable for use as a protective device in the end-use product.

A special fuse is a single function (providing protection only) device intended to interrupt a current flow when the current passing through it exceeds a preselected value. It is nonrenewable, that is, the fuse element cannot be replaced after operation, but it can be multi-operational (multi-element).

The acceptability of any special fuse covered by these requirements in any particular device or appliance depends upon its effectiveness in continued use under the conditions that prevail in actual service. Accordingly, for a particular application, the special fuse may be affected by the requirements for the device or appliance in question, and it may be necessary to employ protective devices having features other than, or in addition to, those specified in these requirements.

A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this Standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements to determine that the level of safety as originally anticipated by the intent of this Standard is maintained. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this Standard shall not be judged to comply with this Standard. Where appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this Standard.