CSA C22.1-15 Interactive Standard

It’s the CE code like never before!

Overview: Whether you’re a contractor, installer, designer or manufacturer, it is your responsibility to ensure that your electrical installations are compliant with the requirements of the Canadian Electrical Code, Part I. Now there’s a new interactive tool that can provide additional clarity into the sometimes-complex requirements of the Canadian Electrical Code.

The Canadian Electrical Code Interactive combines the Canadian Electrical Code, Part I and the CE Code Handbook into a powerful ebook format with enhanced navigation and markup capabilities. Supporting material in the Handbook for relevant sections of the CE Code is just one click away, while integrated calculators provide enhanced ability to easily locate, interpret and calculate key CE Code requirements. It’s the most comprehensive, easy-to-use set of CE Code tools we’ve ever offered!

Key Benefits:

• Developed in eBooks format optimized for tablet yet scalable to smaller devices.
• Integrated within: 2015 Canadian Electrical Code and 2015 Canadian Electrical Code Handbook
• Provides easy access to Code rules and explanations accessing descriptions, rationale and commentary found in the CE Code Handbook.
• Includes search capability with logic (use “&”, “or”). Navigate by rule, topic or key word.
• Make it your own: Ability to eMarkup, navigate history and set bookmarks for future reference.
• ZOOM capability into colour images, charts and schematics.
• Animation on key diagrams for enhanced learning (ie. Current flow).
• Built-in calculators accessible throughout document or as a separate application.
• Quick reference capability to most commonly used rules, charts and diagrams.
• Electronic format can be updated when needed to reflect changes or to add additional content.

This twenty-third edition of the Canadian Electrical Code, Part I, was approved by the Committee on the Canadian Electrical Code, Part I, and by the Regulatory Authority Committee at their June 2014 meetings in Charlottetown, Prince Edward Island. This twenty-third edition supersedes the previous editions, published in 2012, 2009, 2006, 2002, 1998, 1994, 1990, 1986, 1982, 1978, 1975, 1972, 1969, 1966, 1962, 1958, 1953, 1947, 1939, 1935, 1930, and 1927.

This edition features important revisions to many Sections. Section 4 now contains requirements for high-voltage cable ampacities and clarified Rules for conductor termination temperature. In addition, a new table (Table 39) simplifies residential service and feeder conductor selection. More options are provided for load and voltage drop calculations.

Bonding conductor selection has been clarified through the addition of the new Tables 16A and 16B. In addition, Section 12 contains many new and revised requirements for wiring methods, and the conduit fill tables have been expanded.

Section 18 has undergone major revisions. Requirements for Class II and Class III locations have been relocated to Appendix J, and requirements for explosive dust atmospheres based on IEC Zone 20, Zone 21, and Zone 22 have been added to Section 18.

Object

The object of this Code is to establish safety standards for the installation and maintenance of electrical equipment. In its preparation, consideration has been given to the prevention of fire and shock hazards, as well as proper maintenance and operation.

The requirements in this Code address the fundamental principles of protection for safety contained in Section 131 of International Electrotechnical Commission Standard 60364-1, Low-voltage electrical installations. IEC 60364-1, Section 131, contains fundamental principles of protection for safety that encompass protection against electric shock, thermal effects, overcurrent, fault currents, and overvoltage. Therefore, compliance with the requirements of this Code and proper maintenance will ensure an essentially safe installation. Safe installations may be also achieved by alternatives to this Code, when such alternatives meet the fundamental safety principles of IEC 60364-1 (see Appendix K). These alternatives are intended to be used only in conjunction with acceptable means to assess compliance of these alternatives with the fundamental safety principles of IEC 60364-1 by the authorities enforcing this Code.

Wiring installations that do not make provision for the increasing use of electricity may be overloaded in the future, resulting in a hazardous condition. It is recommended that the initial installation have sufficient wiring capacity and that there be some provision made for wiring changes that might be required as a result of future load growth.

This Code is not intended as a design specification nor as an instruction manual for untrained persons.

Scope

This Code covers all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and self-propelled marine vessels stationary for periods exceeding five months and connected to a shore supply of electricity continuously or from time to time, with the following exceptions:

(a) installations or equipment employed by an electric, communication, or community antenna distribution system utility in the exercise of its function as a utility, as recognized by the regulatory authority having jurisdiction, and located outdoors or in buildings or sections of buildings used for that purpose; (b) equipment and facilities that are used in the operation of an electric railway and are supplied exclusively from circuits that supply the motive power; (c) installations or equipment used for railway signalling and railway communication purposes, and located outdoors or in buildings or sections of buildings used exclusively for such installations; (d) aircraft; and (e) electrical systems in ships that are regulated under Transport Canada.

For mines and quarry applications, see also CSA M421.

This Code and any standards referenced in it do not make or imply any assurance or guarantee by the authority adopting this Code with respect to life expectancy, durability, or operating performance of equipment and materials so referenced.

Download for use on most iOS or Android mobile devices