This is the first edition of a series of Standards covering minimum requirements for safe operation, acceptable performance, design, construction, manufacture, marking, and testing of portable liquid fuel burning appliances.
In 1966 the CSA Council on Fire Safety asked that consideration be given to preparing standards on portable oil-fired camping appliances. The Subcommittee on Portable Kerosene Heaters was given the task of preparing the Standards on all liquid fuelled portable appliances.
Safe and satisfactory operation of portable liquid fuelled appliances depends to an extent upon proper operation and the proper fuel burned.
While these appliances do not require installation and are generally self-contained, the intent and the definitions of the latest issue of CSA Standard B139, Installation Code for Oil Burning Equipment, should be applied to the use of this equipment.
This Standard was prepared by the Committee on Oil Burning Appliance Standards under the jurisdiction of the Sectional Committee on Oil Burning Equipment and was formally approved by these Committees.
Scope:
1.1
This Standard applies to non-pressurized liquid fuelled catalytic appliances ranging in input capacities from 1,000 Btuh to 15,000 Btuh primarily used as portable space heating appliances.
1.2
Appliances with input capacities larger or smaller than anticipated by this Standard may be examined and tested in accordance with the intent of these requirements, with any additional requirements deemed necessary by the authority having jurisdiction.
1.3
This Standard includes requirements for materials, construction, performance, durability, and safety factors; marking and instruction requirements are also included.
1.4
Portable appliances having materials or forms of construction differing from those contemplated or covered by these requirements but meeting the intent of the requirements, may be examined and tested according to the intent of the requirements, and if found to be substantially equivalent, may be given recognition.
1.5
Portable appliances which comply with these requirements shall not be acceptable if, when examined and tested, they are found to have additional features which impair the results contemplated by the requirements of this Standard.